SQL Monitor 8

Filtering alerts

You can filter the alerts that are displayed in the Alert Inbox in two basic ways:

  • by the selection in the Monitored servers list
  • by alert attributes (using system or custom filters)

These two methods of filtering the Alert Inbox always work in combination.

Persistent filtering

Filtering is persisted, so when you return to the Alert Inbox after selecting a different web page, the previous filtered list is displayed.

The Monitored servers list

The Monitored servers list controls the objects for which alerts are displayed. For example, if you select a database in the list, then only alerts relating to that database are listed.

The current object selection is reflected in the Monitored Servers list:

In this example, the Alert Inbox is displaying only alerts on a selected group (1-Production). 

Global filters

The Global filters are available above the Monitored servers list. They are a quick way of getting back to a sensible starting point.

The Global filters are shortcuts that carry out two actions at once:

  1. Reset the Monitored servers list back to All Servers.
  2. Apply a system filter to the Filter drop-down list.
The All alerts filter excludes cleared alerts. Cleared alerts are hidden by default so they don't clutter up your Alert Inbox.

System filters

The Filter drop-down above the Alert Inbox contains a number of predefined filters, covering typical scenarios for filtering the Alert Inbox. For example, you can view only Low, Medium, or High level alerts, or see all Active alerts.

As soon as you select a filter, the Alert Inbox is updated.

Select the Cleared filter to view all cleared alerts. All the other filters (including All) hide cleared alerts from the inbox.

Custom filters

Click Advanced filter to expand the filter panel, where you can apply any combination of filter options you want.


To collapse the filter panel click Hide Advanced filter again.

The Advanced filter panel allows you to filter alerts in a number of ways:

  • By type
  • By time (when the alert was raised)
  • By level
  • By status
  • By properties

All these options work in combination. You can be very specific about which alerts you want to see, for example, High level deadlocks that are unread in the last hour, or all Active alerts with comments except Low level alerts and Job failed alerts between last night and today.

You can then save and apply these custom filters to all objects or selected objects only.

Filtering by type

To filter by type, select the checkbox for each alert type you want to show in the Alert Inbox. Use the Select none button first to clear the selection if you only want to choose one or two types to display.

If you are familiar with the alert names, type the first few characters of an alert name in the Search box. Only matching alerts are displayed. (You may need to choose Select none and then Select all if you want to select only the matching alerts.)

You can see how many alerts match the current filter options by looking at the Showing.... number.

Filtering by time

The time filter applies to the time each alert was raised. Under Time, select how you want to filter the alerts:

  • Last Updated Within: select a fixed time period from the drop-down list
  • Last Updated from x to y: click in each box to choose a date and time. You can use only one box if required, for all alerts that were raised up to a fixed point in time, or all alerts starting from a fixed point in time.
    Note: Alerts will be shown that were raised in the minute matching the "End" time; for example, if you want to view alerts between 10:00 and 14:00, alerts that were raised up till 14:01 will be shown.

The number of alerts is updated instantly, and the Showing.... number changes accordingly.

Click the x to remove the time filter (reset it to "Any time").

Filtering by other properties

Choose the required checkboxes under Level, Status, and Properties to filter the Alert Inbox. As soon as you clear or select a checkbox, the list of alerts is updated accordingly to match your selection.

Why have all the alerts vanished from the list?

You can select combinations of filter options that will always result in zero matching alerts:

In this example, you are telling SQL Monitor that you don't want to see alerts that are either Read or Unread. However, all alerts must be either Read or Unread; therefore no alerts will ever match this set of options.

Similarly, you can choose both Has comment and No comment or Cleared and Not cleared. In each case, no alerts can possibly match the selection.

The Alert Inbox may also be empty because no alerts happen to match a legitimate combination of options.

Saving advanced filter options as a custom filter

When you have selected the advanced filter options you want, you can save them as a custom filter.

This allows you to quickly reapply all the filter options you have selected, without having to reselect them again each time. You can save any number of custom filters, and this may help you prioritize which alerts you investigate - Deadlocks first, followed by all High alerts except deadlocks, then all alerts within the last two hours, and so on.

To save your filter options as a custom filter:

  1. Click the Save as new filter button. The Save as custom filter box is displayed:

  2. Type a name for the custom filter. You cannot use the name of a system filter.
  3. Click Save. Your custom filter is now available from the Filter drop-down list:

    Custom filters are listed in alphabetical order below the system filters.

To delete a custom filter

  1. Select the filter you want to delete from the Filter list.
  2. Click the delete button

    The Filter list defaults back to All, but the custom filter options are persisted until you explicitly select something else.

To edit a custom filter

  1. Select the filter you want to edit from the Filter list.
    This filter is immediately applied to the Alert Inbox.
  2. Click Advanced filter to display the advanced filter pane, showing the saved options for this filter.
  3. Edit the options. 
  4. Save the custom filter:
    • To save the edited custom filter, click the Save Changes button.
    • To create a new custom filter, click the Save as new filter button. The previous custom filter remains unchanged, and a new custom filter is created.

Do you have any feedback on this documentation?

Let us know at sqlmonitorfeedback@red-gate.com


Didn't find what you were looking for?